Every once in a while we’ll run into a car enthusiast that likes to go the extra mile. Not to outdo anyone per-se but to challenge himself and at the same time do something he/she enjoy doing. Today that someone is Kyle Lauritano out of Florida with his Subaru. It’s an ongoing project car to him as he has quite a few more plans for it in the future but we figured we should show it off anyway since it looks great as is. There is not much that can be done to a Subaru (or any other car really) that hasn’t been done before, though that doesn’t mean you shouldn’t do it. Kyle obviously felt the same way about doing whatever you want to your car so he chose to convert his to a rear wheel drive. Why? To have fun and do what he truly enjoys. You’ll see what that is on the bottom of this feature (if it isn’t obvious enough).
Photos By: Daniel Vicente exclusively for StanceNation.com
So this is how the car sits at the moment. Fitted with a beautiful set of Enkei RPF1′s in 18×9.5 with 0 offset and 225/40/18 tires up front, and 19×9.5 with 0 offset and 235/35/19 tires in the rear. It’s far beyond wheels/suspension & a few aero pieces for Kyle, literally every bushing & link was upgraded. His short term plans include rear aprons and DSS axles so he can start doing events again without having to replace and axle every other run. Also, the rear end will be treated to a nice diffuser and some other aero bits here and there. Kyle tells us that the main focus for him right now is to get some seat time and feel the car out. As you can tell by the tire tread below, this bad boy likes to go sideways!
With that said, please make sure you click the Read More link below to check out more photos of this thing. We included some sideways photos as well on the bottom that you’ll love. Big shout out to Kyle for doing something a bit different and huge thanks to our friend Daniel for the great photos.
Suspenion/Drivetrain:
-Megan Track Coilovers
-Modded Front Spindles for additional Angle
-Removed front axles
-Sti Ra 5-speed Gearset
-Welded center diff
-factory short-shift
-4:11 r-160 (Welded)
-Act 6-puck unsprung
-Aluminum flywheel
-Whiteline steering rack bushings
-Whiteline adj. rear lateral links
-Whiteline Caster Adj.
-Whiteline Bumpsteer & Roll-Center kit
-Perrin Rear Diff Mounts
-all new pads, rotors, & fluid
-h6 rear brakes
-Enkei Rpf-1′s
-5×100 to 5×114 hub adatpters
-18×9.5 +0 front // 225/40/18
-19×9.5 +0 rear // 235/35/19
Body/Interior:
-Rolled and pulled fenders & 1/4′s
-Audi Gray off a tt
-Autopower 6-point bolt-in cage
-Nrg quick release hub
-Sparco wheel
-Replica P1 front lip
-Replica version v front lip modded
-Replica Mines Spoiler
-Kakumi Roof wing
Engine:
-Cobb Tuned Ecu
-Unequel length headers
-”3 Turbo Back w/ divorced dp
-up-pipe
-STi Top Mount
-Cusco turbo heat shield
-Perrin Intake
-Modded stock airbox
-Forge Adj. Internal wastegate (14 psi spring)
-Turbo xs mbc (running 17psi)
-stock turbo
-Walboro Fuel Pump
-NGK Irridiums
