BLACKLIST
02-10-2011, 12:20 PM
Some of you may have wondered where i have been. At times i need to take a breather away from shit and step into my other hobbies a little more. Over the course of the last few months i have had some other builds i figured i would share.
As some of you know, i am a fucking gun nut. I love them shits. ..I have a few very close friends who are active army rangers, special forces, or seals. Throughout life ive always had a passion for rifles and so forth, but never really set my mind to building a custom one of my own.. well i finally took a stab and figured i would share with some in the occurance that there is some gun nuts out there who would dig it.
Here is the outcome of the latest build..
Heres the ingredients...
Seekens Precision billet stripped lower (currently being machined, using RRA LAR-15 lower in meanwhile)
-Sabre Defence Industries 1 in 7 twist chrome vanadium lined 16" Gas Piston M5 upper with full length quad rail
-Troy Defence flip up irridium BUIS
-Eotech 553 SOCOM
-Eotech G23 FTS 3x magnifier with swivel mount breakaway adapter for CQB
-PWS weapon systems enhanced billet buffer tube
-FRS anti tilt tungsten buffer
-Superior shooting systems enhanced buffer spring
-Magpul CTR Mil spec collapsable stock
-LaRue tactical Magpul CTR stock enhancing shoulder mount
-Magpul BAD lever for bolt action release
-Magpul alum enhanced trigger guard
-Magpul angled foregrip
-Magpul MOE vertical foregrip (testing both, not sure i want one vs the other, just use both, lol)
-Magpul enhanced changable grip system
-Timney precision 3lb skeletonized billet trigger assembly
-Mike Vickers Blue force tactical sling with qd mounts
-Samson tool kit for inside Magpul grip system
-Magpul PMAG 30 round mags
-Noveske KX3 flash suppressor
-Streamlight TLR-2S 160 lumen c4 led light with laser
-Gas Buster charge handle
-Upgraded chrome carrier group with cryo treating
heres some bullshit pics along the build.. All of the items are not here yet, so i am still waiting on some shit before its completed.
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar6.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar5.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar4.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar3.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar3.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar2.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/arcomplete.jpg (still missing backup iron sights and i have not removed the vertical grip after testing both and deciding i like the angled better).
Since some are not gun nuts, and just think its a rifle,and "a rifle is a rifle" this is a 5000.00+ rifle that is more or less entirely combat socom spec modeled directly off the HK416 in every attribute possible.
ENJOY!
As some of you know, i am a fucking gun nut. I love them shits. ..I have a few very close friends who are active army rangers, special forces, or seals. Throughout life ive always had a passion for rifles and so forth, but never really set my mind to building a custom one of my own.. well i finally took a stab and figured i would share with some in the occurance that there is some gun nuts out there who would dig it.
Here is the outcome of the latest build..
Heres the ingredients...
Seekens Precision billet stripped lower (currently being machined, using RRA LAR-15 lower in meanwhile)
-Sabre Defence Industries 1 in 7 twist chrome vanadium lined 16" Gas Piston M5 upper with full length quad rail
-Troy Defence flip up irridium BUIS
-Eotech 553 SOCOM
-Eotech G23 FTS 3x magnifier with swivel mount breakaway adapter for CQB
-PWS weapon systems enhanced billet buffer tube
-FRS anti tilt tungsten buffer
-Superior shooting systems enhanced buffer spring
-Magpul CTR Mil spec collapsable stock
-LaRue tactical Magpul CTR stock enhancing shoulder mount
-Magpul BAD lever for bolt action release
-Magpul alum enhanced trigger guard
-Magpul angled foregrip
-Magpul MOE vertical foregrip (testing both, not sure i want one vs the other, just use both, lol)
-Magpul enhanced changable grip system
-Timney precision 3lb skeletonized billet trigger assembly
-Mike Vickers Blue force tactical sling with qd mounts
-Samson tool kit for inside Magpul grip system
-Magpul PMAG 30 round mags
-Noveske KX3 flash suppressor
-Streamlight TLR-2S 160 lumen c4 led light with laser
-Gas Buster charge handle
-Upgraded chrome carrier group with cryo treating
heres some bullshit pics along the build.. All of the items are not here yet, so i am still waiting on some shit before its completed.
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar6.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar5.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar4.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar3.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar3.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/ar2.jpg
http://i516.photobucket.com/albums/u326/CryptKeeper138/arcomplete.jpg (still missing backup iron sights and i have not removed the vertical grip after testing both and deciding i like the angled better).
Since some are not gun nuts, and just think its a rifle,and "a rifle is a rifle" this is a 5000.00+ rifle that is more or less entirely combat socom spec modeled directly off the HK416 in every attribute possible.
ENJOY!