Db7 stance in the making.

[db7daily]

So I've decided to play low offset/ wide wheels on my silver ls integra db7. Mostly because I've barely ever seen it done to an integra 4dr.

Mods done on car. (recently just started modding)

VIS Carbon Fiber hood and trunk. (Hood is temporary til I can order an oem style carbon fiber hood.)
8k HIDS
Wings west front lip
Type r rear valences
Gsr leather full interior
Minor drop
Skunk 2 front and rear camber kit
More to come.

Plans for the next couple months:
Drop on Skunk2 Pro S II coilovers
Paint championship white
Replace type r rear valence with wings west rear lip
Recaro front seats, and type-r rear


Wheels are XXR 522 16x8 +0, they came wrapped in 195/50/16 planning on getting some 45's soon.

http://184.72.239.143/mu/a6890f9f-0aa5-20fd.jpg

I had to wait about 2 weeks for the camber kits to come in so the car had to sit on wheels for awhile with a (mexi flush) going on. Lol of course it wasn't really drivable due to the excessive rubbing.

Pictures below are before the camber kits came in.
http://184.72.239.143/mu/a6890f9f-0b7f-b430.jpg
http://184.72.239.143/mu/a6890f9f-0ba6-ad28.jpg
http://184.72.239.143/mu/a6890f9f-0bc5-92bd.jpg
http://184.72.239.143/mu/a6890f9f-0be4-e656.jpg


Skunk2 camber kits front n rear
http://184.72.239.143/mu/a6890f9f-0a83-12d3.jpg
http://184.72.239.143/mu/a6890f9f-0b02-8e9c.jpg

Finally had time to put the camber kits on and roll the fenders but can't seem to figure out why my rear won't camber as much as my front wheels. Work still in progress and car needs to go lower. Lol

http://184.72.239.143/mu/a6890f9f-0c60-3cbd.jpg

More pictures will be up soon.

[Elvis]

Welcome buddy. Though, I thought I Was going to see an Aston Martin DB7 lol!

[db7daily]

Lol sorry, it's just a plain ol integra =|

[young gunna]

welcome man, can't wait to see the timeline of this thing! my buddy has a sick gsr sedan

[ishnathan]

smaller tires, jdm front and your set

[db7daily]

Still debating on the jdm front or not.

I got this car afte I wrecked my 97 civic hatchback. (I'm still looking for another one.)

http://184.72.239.143/mu/a6890f9f-47c1-6ee1.jpg

And it turned into this...
http://184.72.239.143/mu/a6890f9f-47eb-2433.jpg

Idk if this is off topic but felt like I should put down a little timeline.

This is the car a month after i got it. I got the car bonestock. But of course I had to slam it =p lol

http://184.72.239.143/mu/a6890f9f-4539-3b37.jpg


About another month or two i hit the wrong bump and cracked my transmission so i raised the car up a bit. Then put in the sound system. 2 DD's 10 inch subs and a type - r lip

http://184.72.239.143/mu/a6890f9f-45b2-a2bc.jpg

http://184.72.239.143/mu/a6890f9f-4630-7f59.jpg

Another month passed by and decided to buy something else for the car so I got a carbon fiber trunk and ended up buying a hood from a
Private buyer just cuz it was only $100 lol. Also got tired of the type r front lip cuz I felt "everyone had one" so i ordered a wings west front lip to kinda give It that "meaner" look.

http://184.72.239.143/mu/a6890f9f-46e4-f79f.jpg
http://184.72.239.143/mu/a6890f9f-4753-d672.jpg
http://184.72.239.143/mu/a6890f9f-476f-c379.jpg

Let my boy borrow the car one day to go to work. And he ended up coming home with a big dent on my rear drivers side door.

http://184.72.239.143/mu/a6890f9f-4685-0700.jpg

[young gunna]

hope your boy is paying to get the dent out dude, that sucks! the hatch was sick btw

[db7daily]

Yea he is, I have to get a whole new door. I do have some damage on the quartpanel too, put i pulled it out to fit the new wheels, the picture is below. The new door is not going to match up with the rest of the car but thankfully I already have my championship white paint. Just waiting for some cash to get it into the paint booth.

http://184.72.239.143/mu/a6890ef5-53ad-0bb9.jpg

This is what the damaged quarterpanel looked like on top of my tire before I pulled it out and put on my rear camber kit. Sitting right on top of the tire.
http://184.72.239.143/mu/a6890ef5-547a-97ff.jpg

[db7daily]

So I got bored last night and put on the dc tie bar.

http://184.72.239.143/mu/a6890ef5-1427-967e.jpg

I know my suspension setup is weaksauce compared to a lot of people on here, but I'm balling on a budget. Went to Goodyear this morning to try and get an alignment but they said they can't get it on the alignment rack because they said "the car is wayyyy too low". -_-

[young gunna]

lol NTB said that about my car the other day at first and then i reminded them we had an agreement when i got my alignment plan and they somehow got it up on the rack lol

[db7daily]

Yea but I found another place to get it done, new tires coming in in a couple days. Pics will be up when tires are on.

http://184.72.239.143/mu/a6890ef5-f38f-bd83.jpg
http://184.72.239.143/mu/a6890ef5-f3a6-9cec.jpg
http://184.72.239.143/mu/a6890ef5-f3c2-7d5c.jpg

[Ninjawagon]

To be honest I was disapointed when i opened this thread because I was hoping to see that you Slammed a Aston Martin

but other then that nice car keep up the good work do see to many people stancing out a 4dr integra

[viBe]

Yea but I found another place to get it done, new tires coming in in a couple days. Pics will be up when tires are on.

http://184.72.239.143/mu/a6890ef5-f38f-bd83.jpg
http://184.72.239.143/mu/a6890ef5-f3a6-9cec.jpg
http://184.72.239.143/mu/a6890ef5-f3c2-7d5c.jpg

Where in Louisiana are you from? Like the way your cars coming out.


So I got bored last night and put on the dc tie bar.

http://184.72.239.143/mu/a6890ef5-1427-967e.jpg

I know my suspension setup is weaksauce compared to a lot of people on here, but I'm balling on a budget. Went to Goodyear this morning to try and get an alignment but they said they can't get it on the alignment rack because they said "the car is wayyyy too low". -_-

Goodyear sucks, my brother went to get some tires for his truck, he's running stock rims with smaller tires and the guy said " No way I'm selling you smaller tires." I guess Goodyear doesn't like car customization.

[Hatmanafro]

thats a nice db.
need to go lower tho. for sure. but im sure thats in the works. haha

[slotoyo]

stock hood, turbo and a little lower and then i say it would be dope!

has potential hope to see it progress

[db7daily]

Yea sorry for not being that specific in the title. Lol =x but yea..I've barely ever seen any stances db's. Decided to try it myself and be different.

I'm in the process of getting an oem carbon fiber hood, I'm guessing y'all aren't a big fan of carbon fiber but I have a carbon fiber trunk and I just don't think it looks right without the hood. I personally don't like the style of the hood I have at the moment.

I'm getting the skunk2 pro s II coilovers so I can go lower but I'm really hesitant about slamming it a lot more cuz New Orleans roads really suck! Horribly! A lot of my boys ended up slamming their cars and smacking their transmissions. So it's making me really hesitant about slamming it.

Yes! The turbo will come when I get my gsr motor. And I'm still debating hard on whether or not to go with a jdm front end or not.

So many plans but not enough money! Lol paychecks aren't fat enough.

[db7daily]

Yea but I found another place to get it done, new tires coming in in a couple days. Pics will be up when tires are on.

http://184.72.239.143/mu/a6890ef5-f38f-bd83.jpg
http://184.72.239.143/mu/a6890ef5-f3a6-9cec.jpg
http://184.72.239.143/mu/a6890ef5-f3c2-7d5c.jpg

Where in Louisiana are you from? Like the way your cars coming out.


So I got bored last night and put on the dc tie bar.

http://184.72.239.143/mu/a6890ef5-1427-967e.jpg

I know my suspension setup is weaksauce compared to a lot of people on here, but I'm balling on a budget. Went to Goodyear this morning to try and get an alignment but they said they can't get it on the alignment rack because they said "the car is wayyyy too low". -_-

Goodyear sucks, my brother went to get some tires for his truck, he's running stock rims with smaller tires and the guy said " No way I'm selling you smaller tires." I guess Goodyear doesn't like car customization.

I know I'm starting to develop a hate for Goodyear lol, I looked at the rack and I knew for a fact my car can make it up because personally I don't even think my car is that low YET. It's probably a little lower or the same height as a corvette. And there was a vette on one of their racks!! I was pissed but I just left and finally found another shop that can do it. New tires will be on this thursday. Going with 205/40/16 on those chromium black xxr's 16x8 +0. I can't find any 195/40/16's that aren't yokahoma's cuz I heard those are "chunky" tires and don't stretch well at all.

[db7daily]

Ok so today I took the car to put on the new tires. Turns out, my wheels are 15's!! I slapped myself in the face for making such a noob mistake! So I posted those rims up for sale and picked up some XXR 501's 16x8 +15, with brand new falken 205/40/16 tires. Here are some pictures. There's something about them i don't really like but I can't figure it out. Maybe my car just needs to be lowered more, idk! Lol these are blurry, will have more up soon. Let me know what you think.

http://184.72.239.143/mu/a6890f78-6cc0-b332.jpg
http://184.72.239.143/mu/a6890f78-6ce1-b38a.jpg

[db7daily]

http://184.72.239.143/mu/a6890ff0-ab75-7fe7.jpghttp://184.72.239.143/mu/a6890ff0-ab8a-4c78.jpg
http://184.72.239.143/mu/a6890ff0-aba8-759d.jpg

[young gunna]

i like how the wheels look!

[db7daily]

Thanks, but for some reason I can't get the rear to camber more, my fronts are where I want them to be, but my rears are barely cambered.

[young gunna]

i think the skunk 2 rear camber arms for a of the honda's maxed out at -3