Official Stance Nation rims/tyres specs (with photos)

[13tsp]

Hello dear friends.
Here we can post all our tyre/rim spec with photos of course.
Because I don't have a car right now, I'll start with a friends car.
BMW 316i E36 Coupe.
http://farm5.static.flickr.com/4065/4559922499_b91e26cc81_b.jpg
http://farm4.static.flickr.com/3048/4560551724_9f1603a620_b.jpg
Tyres spec-215/40
Rims size-17 inches with ET35 (offset), and 7,5j all around.
Don't know for sure what kind of rims are those, but I'll keep you guys posted.
The owner wants to put some spacers in the front, the wheels is too under the wheel arch (fender).
What you guys got?

[DurdySi]

Here's my current setup: 2007 Civic Si sedan (FA5 chassis) with Ruff R350, Hyperblack, 17x7 +45 offset (same as OEM) ; Nexen N5000 215/45/17 tires
http://i78.photobucket.com/albums/j114/smbdyshero/car/100_0047.jpg
Changing wheels soon! More pix OTW!

[gallhue]

ill post my pics next week but there

sportmax 002 16x8+0
205/45f
195/45r
yokohama s.drive

[13tsp]

ill post my pics next week but there

sportmax 002 16x8+0
205/45f
195/45r
yokohama s.drive

What are you driving?

[gallhue]

02 dc5

[iLLest_Z]

with wheel offsets/sizes/etc. questions popping up all the time, let's put a database together of your setup that can help out everyone on this site!

1. Username: iLLest_Z
2. Vehicle and Year:2007 350z
3. Rim brand, and type:Volk GTS
4. rim size f/r :19x9.5 19x10.5
5. rim offset f/r:+14 +18
6. tire size f/r:235/35/19 235/35/19
7. BBK? if so brand:no
8. spacers needed f/r:f15mm r20mm
9. extended lugs? f/r:no
10. lowered? with what setup?:stance coil overs
11. front tire rubbing? inside/outside:a little rubb
12. tire rubbing rear?:no
13. fenders rolled f/r:rears rolled only
14. if you could re-order your current set-up, what would you change+-0 off set all around



http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs448.ash1/24713_112178435482727_100000717120868_125958_46103 38_n.jpg
http://www.chicagoz.com/forums/picture.php?albumid=476&pictureid=4736

[Elvis]

1. Username: Elvis 2006 Dodge Charger SRT8.
3. Rim brand, and type: Factory Reproductions Viper Replica Wheels.
4. rim size f/r : 22X10 all around.
5. rim offset f/r: +18 all around.
6. tire size f/r: 245/30/22 all around.
7. BBK? if so brand: 14inch rear/12 inch front, Brembos.
8. spacers needed f/r: 20MM Adapters FRont, 30MM Adapters REar.
9. extended lugs? f/r: None.
10. lowered? with what setup?: BC Racing Coilovers.
11. front tire rubbing? inside/outside: Only when car loaded, or when taking sharp turns at higher speeds.
12. tire rubbing rear?: Not at all.
13. fenders rolled f/r: YEah, Rolled and pulled all 4 corners.
14. if you could re-order your current set-up, what would you change: Nothing!

[13tsp]

with wheel offsets/sizes/etc. questions popping up all the time, let's put a database together of your setup that can help out everyone on this site!

1. Username: iLLest_Z
2. Vehicle and Year:2007 350z
3. Rim brand, and type:Volk GTS
4. rim size f/r :19x9.5 19x10.5
5. rim offset f/r:+14 +18
6. tire size f/r:235/35/19 235/35/19
7. BBK? if so brand:no
8. spacers needed f/r:f15mm r20mm
9. extended lugs? f/r:no
10. lowered? with what setup?:stance coil overs
11. front tire rubbing? inside/outside:a little rubb
12. tire rubbing rear?:no
13. fenders rolled f/r:rears rolled only
14. if you could re-order your current set-up, what would you change+-0 off set all around



http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs448.ash1/24713_112178435482727_100000717120868_125958_46103 38_n.jpg
http://www.chicagoz.com/forums/picture.php?albumid=476&pictureid=4736

That's perfect my friend. We expect that more forumists present here theyr mods. :D

[PRTizzle]

1. Username: PRTizzle
2. Vehicle and Year: 2006 Acura RSX
3. Rim brand, and type: Volk TE37
4. rim size f/r :18x9.5 18x10.5
5. rim offset f/r: +22 +22
6. tire size f/r: 235/35/18 235/40/18
7. BBK? if so brand: None but coming soon
8. spacers needed f/r: None
9. extended lugs? f/r: Muteki Extended Lugs
10. lowered? with what setup?: Buddy Club N+ Coilovers
11. front tire rubbing? inside/outside: No Rubbing
12. tire rubbing rear?: No Rubbing
13. fenders rolled f/r: Rears rolled only
14. if you could re-order your current set-up, what would you change: None
15. Camber f/r: -4.5 and -5.5

I added the last question on how much camber/

[13tsp]

1. Username: PRTizzle
2. Vehicle and Year: 2006 Acura RSX
3. Rim brand, and type: Volk TE37
4. rim size f/r :18x9.5 18x10.5
5. rim offset f/r: +22 +22
6. tire size f/r: 235/35/18 235/40/18
7. BBK? if so brand: None but coming soon
8. spacers needed f/r: None
9. extended lugs? f/r: Muteki Extended Lugs
10. lowered? with what setup?: Buddy Club N+ Coilovers
11. front tire rubbing? inside/outside: No Rubbing
12. tire rubbing rear?: No Rubbing
13. fenders rolled f/r: Rears rolled only
14. if you could re-order your current set-up, what would you change: None
15. Camber f/r: -4.5 and -5.5

I added the last question on how much camber/

Among the tyres and rims mods, you must post a pic of your car. :violin:

[glassjaw]

1. Username: GlassJaw
2. Vehicle and Year: 2009 Scion tC
3. Rim brand, and type: Rota DPT
4. rim size f/r :18x9.5
5. rim offset f/r: +25r +30f (soon to change)
6. tire size f/r: 215/35/18
7. BBK? if so brand: none yet
8. spacers needed f/r: 5mm front...10mm rear
9. extended lugs? f/r: Deevo Extended black
10. lowered? with what setup?: Raceland Coilovers
11. front tire rubbing? inside/outside: only on full lock
12. tire rubbing rear?: Rim fender rub.
13. fenders rolled f/r: Rolled and Slightly Pulled
14. if you could re-order your current set-up, what would you change: lower offset to get rid of spacers
15. Camber f/r: unknown =)

yall know what the car looks like. a POS

[samsneez]

1. Username: Samsneez
2. Vehicle and Year: 2006 Scion tC
3. Rim brand, and type: Rota D2
4. rim size f/r :18x9
5. rim offset f/r: +30 all around
6. tire size f/r: 215/40/18 all around
7. BBK? if so brand: none yet
8. spacers needed f/r: 25mm all around
9. extended lugs? f/r: n/a
10. lowered? with what setup?: Raceland Coilovers
11. front tire rubbing? inside/outside: Passenger side only
12. tire rubbing rear?: big bumps only
13. fenders rolled f/r: Rolled/Rolled slight pull
14. if you could re-order your current set-up, what would you change: Work Meister SP1 3 Piece wheels instead
15. Camber f/r: -3.2/-4.5


http://farm4.static.flickr.com/3414/4576384821_10dea68717_b.jpg

[TheKevin]

1. Username: TheKevin
2. Vehicle and Year: 2007 Scion tC
3. Rim brand, and type: BBS LM
4. rim size f/r: 18x8.5
5. rim offset f/r: +25
6. tire size f/r: 215/35-18
7. BBK? if so brand: n/a
8. spacers needed f/r: n/a
9. extended lugs? f/r: kics project r40 neo chro
10. lowered? with what setup?: B&G coil overs
11. front tire rubbing? inside/outside: hella
12. tire rubbing rear?: not as much
13. fenders rolled f/r: rear fenders shaved
14. camber: n/a
15. if you could re-order your current set-up, what would you change?: 0 offset and 9" wide all around but that'll have to be custom made
http://scionlife.com/forums/picture.php?albumid=99&pictureid=4514

1. Username: TheKevin
2. Vehicle and Year: 1992 Lexus SC400
3. Rim brand, and type: Kenstyle LockSmice Mesh LS-M
4. rim size f/r: 19x10
5. rim offset f/r: +29R/+34F
6. tire size f/r: 235/35-19
7. BBK? if so brand: n/a
8. spacers needed f/r: F 15mm/R 20mm
9. extended lugs? f/r: kics project r40 neo chro
10. lowered? with what setup?: PSM coilovers
11. front tire rubbing? inside/outside: hella
12. tire rubbing rear?: hella
13. fenders rolled f/r: rolled all around
14. camber: -3.0* all around
15. if you could re-order your current set-up, what would you change?: 0 or lower offset, 225/40-19 tires all around
pic is w/o spacers
http://scionlife.com/forums/picture.php?albumid=167&pictureid=5481

1. Username: TheKevin
2. Vehicle and Year: 2009 Camry SE V6
3. Rim brand, and type: BBS MR/RG
4. rim size f/r: 18x8.5
5. rim offset f/r: +38
6. tire size f/r: 245/40-18
7. BBK? if so brand: n/a
8. spacers needed f/r: n/a
9. extended lugs? f/r: n/a
10. lowered? with what setup?: B&G springs
11. front tire rubbing? inside/outside: n/a
12. tire rubbing rear?: minor, just when there are passengers in the backseat and/or cargo in the trunk
13. fenders rolled f/r: n/a
14. camber: -1* all around
15. if you could re-order your current set-up, what would you change?: coilovers instead of springs, 1 finger gap all around.
http://farm2.static.flickr.com/1319/4605909330_ff602ba70b_b.jpg

[EMU]

1. Username: Emerson 2003 Lexus IS300 sportcross
3. Rim brand, and type: 5Zigen GN+
4. rim size f/r : 17x8.5/9.5
5. rim offset f/r: +38all around
6. tire size f/r: 215/40-17 and 235/40-17
7. BBK? OEM
8. spacers needed f/r: none
9. extended lugs? f/r: none
10. lowered? with what setup?: Standard Coils w/B-G springs
11. front tire rubbing? inside/outside: none
12. tire rubbing rear?: none
13. fenders rolled f/r: shaved Vertex fender front, shaved rear
14. if you could re-order your current set-up, what would you change: i dunno i change rims too often
15. 15. Camber f/r: couldn't tell u, never had an alignment!

http://farm3.static.flickr.com/2784/4452689573_0fe30b143b_b.jpg

[JDR]

1. Username:JDR
2. Vehicle and year: 2005 Mazda3 2.0s
3. Rim brand, and type: Enkei RPF1 with csutom polished lip
4. rim size f/r : 17x9 all around
5. rim offset f/r: +45 all around
6. tire size f/r: 215/45-17 all around
7. BBK?: OEM
8. spacers needed f/r: none
9. extended lugs? f/r: 5mm
10. lowered? with what setup?: Bilstein B8 Sprint shocks, Eibach Sportline springs with 1/1.25 coil cut
11. front tire rubbing? inside/outside: none
12. tire rubbing rear?: none
13. fenders rolled f/r: slightly rolled all around
14. if you could re-order your current set-up, what would you change: some other proper setup. BBS LM?
15. Camber f/r: -1.40 f / -3.15 r

http://s3.images.drive2.ru/car.journal.photos/7800/000/000/0ba/1ff/88ccb65fe7d59580-large.jpg

http://s3.images.drive2.ru/car.journal.photos/7800/000/000/0b3/13a/88ccb2ea5911cee0-large.jpg

[EAmon]

1. Username: EAmon
2. Vehicle and Year: 2006 Scion tB
3. Rim brand, and type: Volk Racing III
4. rim size f/r :18x8
5. rim offset f/r: +38 all around
6. tire size f/r: 215/35/18 all around
7. BBK? if so brand: none
8. spacers needed f/r: 25mm 4x100 to 4x114.3 adapters all around & 10mm Rear Hub Spacer Rear and 6 MM wheel spacer Rear
9. extended lugs? f/r: n/a
10. lowered? with what setup?: Cut Goldline Springs on Monroe Echo Struts Front, Cut OEM springs and Airshocks Rear
11. front tire rubbing? inside/outside: all over
12. tire rubbing rear?: on big bumps
13. fenders rolled f/r: Rolled/Rolled Rear rolled flat. fronts smashed as flat as i could
14. if you could re-order your current set-up, what would you change: Get the final specs and the OG specs and get them in 17s
15. Camber f/r: -2ish F / -4 R


http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs505.ash1/29844_1286908695369_1309716981_30693451_5151722_n. jpg

[Onkar02]

1. Username: Onkar02
2. Vehicle and Year: 2003 Lancer ES
3. Rim brand, and type: ROTA Gridz
4. rim size f/r :16x8
5. rim offset f/r: +10F +5R
6. tire size f/r: 205/45/16 going to 195/40/16
7. BBK? if so brand: none
8. spacers needed f/r: 5mm rear
9. extended lugs? f/r: none
10. lowered? with what setup?: Ksport Coilovers
11. front tire rubbing? inside/outside: front when i turn, rear none
12. tire rubbing rear?: hardly any, on big bumps lol
13. fenders rolled f/r: Rolled and Slightly Pulled
14. if you could re-order your current set-up, what would you change: better coilovers mabye different rims bigger and wider but they dont come in 4x100 LOL.
15. Camber f/r: alot.

[shanemono4]

1. Username: shanemono4
2. Vehicle and Year:2003 subaru 2.5rs
3. Rim brand, and type: XXR 002
4. rim size f/r :16x8
5. rim offset f/r:0 all around
6. tire size f/r:205/55 all around
7. BBK? if so brand:no
8. spacers needed f/r:no
9. extended lugs? f/r:no
10. lowered? with what setup?:BC Racing BR series coils, f&r camber plates
11. front tire rubbing? inside/outside:nope
12. tire rubbing rear?:very minor on huge bumps
13. fenders rolled f/r:Fronts rolled, rears rolled and pulled
14. if you could re-order your current set-up, what would you change: nothing! maybe pick up some 5mm spacers :lol:
15. Camber: 4* front, 3* rear.
http://farm4.static.flickr.com/3325/4611197316_471376be9c_b.jpg
http://farm5.static.flickr.com/4012/4612869632_dabe615d77_b.jpg

[TheKevin]

you guys forgot pics

[DurdySi]

1. Username: DurdySi
2. Vehicle and Year: 2007 Civic Si sedan
3. Rim brand, and type: XXR 962
4. rim size f/r : 17x9
5. rim offset f/r: +35 all around
6. tire size f/r: 215/45 Nankang NS-20 all around ($332, 320A/A)
7. BBK? if so brand: no
8. spacers needed f/r: no
9. extended lugs? f/r: no
10. lowered? with what setup?: Tanabe DF210 springs, stock Si struts, Skunk2 rear camber arms, 1 set of Ingalls front camber bolts (shocks/springs changing soon)
11. front tire rubbing? inside/outside: negative, Ghost Rider
12. tire rubbing rear?: outside rubbing a bit on huge bumps and anytime my 280lb kid brother is squeezed into the backseat
13. fenders rolled f/r: soon and very soon
14. if you could re-order your current set-up, what would you change: should have gotten coilovers first! and Falken 512’s (not currently available in my area)
15. Camber f/r: -0.4* (after coils, will be -1*)
http://i78.photobucket.com/albums/j114/smbdyshero/100_0282.jpg
http://i78.photobucket.com/albums/j114/smbdyshero/100_0293.jpg
http://i78.photobucket.com/albums/j114/smbdyshero/100_0322.jpg
http://i78.photobucket.com/albums/j114/smbdyshero/100_0309.jpg

I will be stanced.

[ATX350]

1. Username: ATX350
2. Vehicle and Year: 2006 Nissan 350z
3. Rim brand and type: Work Equips
4. rim size f/r : 18x10 | 18x12
5. rim offset f/r: -3 | -3
6. tire size f/r: 225/40/18 | 275/35/18
7. BBK? if so brand: Wont fit
8. spacers needed f/r: True offset is achieved without spacers :P
9. extended lugs? f/r: none
10. lowered? with what setup?: BC Racing coilovers
11. front tire rubbing? No
12. tire rubbing rear?: Yes, sidewall rub
13. fenders rolled f/r: Rolled and Pulled
14. if you could re-order your current set-up, what would you change: Nothing, pretty happy.
15. Camber f/r: -2.7 rear

http://lh4.ggpht.com/_O3V0YUR-7Dc/S87QAiJXxBI/AAAAAAAAJNg/8ILcUnnKlMs/s800/4532700454_44227a4fe3_b.jpg

[JDM_OBP]

1. Username: JDM_OBP
2. Vehicle and Year: 2005 WRX
3. Rim brand and type: WORK Varianza T1S and Drag DR31
4. rim size f/r : WORKs 18x9.5, Drags 17x9
5. rim offset f/r: WORKs +35, Drags +28
6. tire size f/r: 255/35/18 and 235/45/17
7. BBK? if so brand: none
8. spacers needed f/r: none
9. extended lugs? f/r: none
10. lowered? with what setup?: BC Racing coilovers
11. front tire rubbing? No
12. tire rubbing rear?: sometimes
13. fenders rolled f/r: rolled/pulled rears only
14. if you could re-order your current set-up, what would you change: 18x10's +25 all around
15. Camber: -2.5f. -2r

http://farm5.static.flickr.com/4053/4455761324_7341133956_b.jpg
http://farm3.static.flickr.com/2562/4085863495_4405420b8e_b.jpg

[gallhue]

ill post my pics next week but there

sportmax 002 16x8+0
205/45f
195/45r
yokohama s.drive

16x8+0
195/45

http://img.photobucket.com/albums/v249/dc2tunerx/Tire1.jpg