ray316
05-29-2011, 10:36 PM
Hello everyone my name is Ray I'm from wichita ks. and I drive a 2007 rallye red si sedan. Ive had my car going on 4 years bought new off the lot back in 07 as a daily driver i kept it mostly stock till this year. Well I was involved in a minor wreck and I had to get a good amount of body work done I was also really bored with it so i decided to give it a slight make over. I'm looking forward from learning from this site thanks for having me!!! :dance:
pics...
stock when first bought with a few minor mods (tint, tein s-tech springs, bolt ons)
http://i96.photobucket.com/albums/l192/ray_316/21o67g1.jpg
while getting body work done and working on fitment (very weak i know)
http://i96.photobucket.com/albums/l192/ray_316/2011-04-05_17-01-00_72.jpg
after body work was done phase 1 (hfp lip kit, skunk 2 pro-c full coilovers and rear camber arms and 18x9 +30 rota d2's on 215/40's which will be upgraded soon to some legit jdm wheels in more aggresive specs!)
http://i96.photobucket.com/albums/l192/ray_316/2011-05-26_12-17-18_574.jpg
http://i96.photobucket.com/albums/l192/ray_316/2011-05-25_15-33-40_253.jpg
http://i96.photobucket.com/albums/l192/ray_316/2011-04-13_19-57-06_739.jpg
http://i96.photobucket.com/albums/l192/ray_316/2011-04-13_19-59-04_123.jpg
got tired of the front end and decided to change it up so i did a 09-11 front end conversion and this is it's current state!!
http://i96.photobucket.com/albums/l192/ray_316/4_imagejpeg_2.jpg
http://i96.photobucket.com/albums/l192/ray_316/2_imagejpeg_2.jpg
looking hella sunk i'm thinking about throwing a 15mm spacer all around
http://i96.photobucket.com/albums/l192/ray_316/3_imagejpeg_2.jpg
future mods include jdm rear end conversion and different wheels i'm searching for either some work vs-xx or equips in 9 or 9.5 width in 20ish offsets to get a lil more poke will also go lower on the front
any comments are welcome and excuse the low quality cell pics a photoshoot is on the way!!!
pics...
stock when first bought with a few minor mods (tint, tein s-tech springs, bolt ons)
http://i96.photobucket.com/albums/l192/ray_316/21o67g1.jpg
while getting body work done and working on fitment (very weak i know)
http://i96.photobucket.com/albums/l192/ray_316/2011-04-05_17-01-00_72.jpg
after body work was done phase 1 (hfp lip kit, skunk 2 pro-c full coilovers and rear camber arms and 18x9 +30 rota d2's on 215/40's which will be upgraded soon to some legit jdm wheels in more aggresive specs!)
http://i96.photobucket.com/albums/l192/ray_316/2011-05-26_12-17-18_574.jpg
http://i96.photobucket.com/albums/l192/ray_316/2011-05-25_15-33-40_253.jpg
http://i96.photobucket.com/albums/l192/ray_316/2011-04-13_19-57-06_739.jpg
http://i96.photobucket.com/albums/l192/ray_316/2011-04-13_19-59-04_123.jpg
got tired of the front end and decided to change it up so i did a 09-11 front end conversion and this is it's current state!!
http://i96.photobucket.com/albums/l192/ray_316/4_imagejpeg_2.jpg
http://i96.photobucket.com/albums/l192/ray_316/2_imagejpeg_2.jpg
looking hella sunk i'm thinking about throwing a 15mm spacer all around
http://i96.photobucket.com/albums/l192/ray_316/3_imagejpeg_2.jpg
future mods include jdm rear end conversion and different wheels i'm searching for either some work vs-xx or equips in 9 or 9.5 width in 20ish offsets to get a lil more poke will also go lower on the front
any comments are welcome and excuse the low quality cell pics a photoshoot is on the way!!!