MoltoMario
06-25-2010, 06:23 PM
Hey guys My name is Mario and here is my 1989 Chrysler Conquest or other wise known, the Mitsubishi Starion. She is no show car or garage queen. Shes seen spirited runs through the Nor-Cal canyons as well as Drift Days at the local Thunderdrift program.
Im located in the East Bay and Down for local meets almost any time.
Heres a little background info on the car
http://starionesir.blogspot.com/2010/02/what-floozie.html
My buddies and I have worked hard to get her where shes at now. Id like to thank my close friends Scotty and Jason for helping me with all the suspension and mechanics on the car. As for my photo buddies. My Kudos go to Kevin and Jp. Both also very close friends of mine and all part of the same group.
Engine/Performance/Go Fast Goodies!
-89 Conquest Fiji blue SHP 97k Miles
-KDM full hard pipe kit.
-KDM 3 inch exhaust with flew pipe
-KDM modified intercooler
-TEP Griffin aluminum radiator
-3 wire o2
-Brand New NGK Spark Plug Wires
-Greddy electronic boost controller
-Cobalt autometer gauges( Boost,Oil Pressure, Oil Temp, Voltage)
-ACT xtreme pressure plate with the street disc. Lightened flywheel, new clutch master and slave, steel braided clutch line.
- Short throw shifter
-Turbo xs RFL blow off valve
- AMC Non jet valve head and Ajusa head gasket
-MK1 gauge overlays
-1st gen MAS DSM
-ABS Eliminated
-S16G Turbo
-AEM Uego Wideband
-Nardi Suede Deep Corn Steering Wheel
-Areomotive Fuel Pressure Regulator
-Custom Powder coated Valve cover( Metallic Purple with some Flake in it)
-Restored 83 Tail Lights. Taken Apart, Cleaned, painted, and re-glued
-Every Line is braided/Everything from Brakes to Coolant lines
-Greddy 80mm Silencer
-Greddy Ti-C Muffler
-Brand New OEM Airdam painted to match
-I also replaced ALL of the braided lines with New Lines and XRP fittings as the old cheap ones all started to leak.
Suspention
- Mookeeh Full-body coilovers
- Mookeeh Front and Rear Camber Plates
- Suspension Technics front and rear sway bars
- Cusco Front Strut Bar
Wheel Fitment
03-04 Cobras
Front 18x9 -6 with 30mm spacer
Rear 18x10.5 -23 with 50mm spacer
Front Tires 225/40/18 Bfgoodrich KDWs
Rear Tires 235/40/18 Feddys
Yea I know the spacer are big, But Starquests dont have any of these + offsets. Stock they are -10
So enough with the none sense...Heres the good stuff :D
http://farm5.static.flickr.com/4029/4579393993_68015420f4_b.jpg
http://farm5.static.flickr.com/4025/4580020236_e77cf027a1_b.jpg
http://farm5.static.flickr.com/4040/4580010962_7672670d15_b.jpg
http://farm5.static.flickr.com/4068/4580003970_529c7af28b_b.jpg
http://farm4.static.flickr.com/3040/4596811561_d132328d00_o.jpg
http://farm2.static.flickr.com/1060/4596811627_4ac545d4e0_o.jpg
http://farm5.static.flickr.com/4026/4596811695_dfe002a570_o.jpg
http://farm2.static.flickr.com/1136/4592207619_67c524f092_b.jpg
http://farm5.static.flickr.com/4002/4427574042_b1aeaa2d37_b.jpg
http://farm3.static.flickr.com/2718/4427573868_41a1817e6e_b.jpg
http://gi354.photobucket.com/groups/r426/P258K9TRXS/DSC_0250.jpg
http://gi354.photobucket.com/groups/r426/P258K9TRXS/DSC_0264.jpg
http://gi354.photobucket.com/groups/r426/P258K9TRXS/DSC_0262.jpg
Thanks Everyone and Enjoy!
Im located in the East Bay and Down for local meets almost any time.
Heres a little background info on the car
http://starionesir.blogspot.com/2010/02/what-floozie.html
My buddies and I have worked hard to get her where shes at now. Id like to thank my close friends Scotty and Jason for helping me with all the suspension and mechanics on the car. As for my photo buddies. My Kudos go to Kevin and Jp. Both also very close friends of mine and all part of the same group.
Engine/Performance/Go Fast Goodies!
-89 Conquest Fiji blue SHP 97k Miles
-KDM full hard pipe kit.
-KDM 3 inch exhaust with flew pipe
-KDM modified intercooler
-TEP Griffin aluminum radiator
-3 wire o2
-Brand New NGK Spark Plug Wires
-Greddy electronic boost controller
-Cobalt autometer gauges( Boost,Oil Pressure, Oil Temp, Voltage)
-ACT xtreme pressure plate with the street disc. Lightened flywheel, new clutch master and slave, steel braided clutch line.
- Short throw shifter
-Turbo xs RFL blow off valve
- AMC Non jet valve head and Ajusa head gasket
-MK1 gauge overlays
-1st gen MAS DSM
-ABS Eliminated
-S16G Turbo
-AEM Uego Wideband
-Nardi Suede Deep Corn Steering Wheel
-Areomotive Fuel Pressure Regulator
-Custom Powder coated Valve cover( Metallic Purple with some Flake in it)
-Restored 83 Tail Lights. Taken Apart, Cleaned, painted, and re-glued
-Every Line is braided/Everything from Brakes to Coolant lines
-Greddy 80mm Silencer
-Greddy Ti-C Muffler
-Brand New OEM Airdam painted to match
-I also replaced ALL of the braided lines with New Lines and XRP fittings as the old cheap ones all started to leak.
Suspention
- Mookeeh Full-body coilovers
- Mookeeh Front and Rear Camber Plates
- Suspension Technics front and rear sway bars
- Cusco Front Strut Bar
Wheel Fitment
03-04 Cobras
Front 18x9 -6 with 30mm spacer
Rear 18x10.5 -23 with 50mm spacer
Front Tires 225/40/18 Bfgoodrich KDWs
Rear Tires 235/40/18 Feddys
Yea I know the spacer are big, But Starquests dont have any of these + offsets. Stock they are -10
So enough with the none sense...Heres the good stuff :D
http://farm5.static.flickr.com/4029/4579393993_68015420f4_b.jpg
http://farm5.static.flickr.com/4025/4580020236_e77cf027a1_b.jpg
http://farm5.static.flickr.com/4040/4580010962_7672670d15_b.jpg
http://farm5.static.flickr.com/4068/4580003970_529c7af28b_b.jpg
http://farm4.static.flickr.com/3040/4596811561_d132328d00_o.jpg
http://farm2.static.flickr.com/1060/4596811627_4ac545d4e0_o.jpg
http://farm5.static.flickr.com/4026/4596811695_dfe002a570_o.jpg
http://farm2.static.flickr.com/1136/4592207619_67c524f092_b.jpg
http://farm5.static.flickr.com/4002/4427574042_b1aeaa2d37_b.jpg
http://farm3.static.flickr.com/2718/4427573868_41a1817e6e_b.jpg
http://gi354.photobucket.com/groups/r426/P258K9TRXS/DSC_0250.jpg
http://gi354.photobucket.com/groups/r426/P258K9TRXS/DSC_0264.jpg
http://gi354.photobucket.com/groups/r426/P258K9TRXS/DSC_0262.jpg
Thanks Everyone and Enjoy!