Hello! Crossfire here!

**XFire** · 04-14-2011, 08:53 AM

Well i have been bittin by the stretched and stanced game. So on the chopping block is gonna be the Crossfire.
Only issue i have is that coilovers are $1600 and drop 2 inches at most. So i am leaning towards air on it.

Gonna need some help being pointed in the right direction for wheels.
Here are the specs
Bolt pattern 5x112
Front:
18x7.5 +35mm
Rear:
19x9 +22mm

I am lookin for a nice deep lip. How does everyone track down the wheels and specs to find what your looking for?

**young gunna** · 04-14-2011, 03:25 PM

pictures! i've never seen a stanced crossfire

**grim300c** · 04-14-2011, 04:44 PM

X2 on the pics.

**XFire** · 04-14-2011, 10:40 PM

wish i had some pictures. I would love to be one of the first with one. gonna need some help. Where are places to look for wheels that give all the specs of the wheels?

And some pics of what we are working with!

**young gunna** · 04-15-2011, 07:44 AM

usually you can find wheel specs on the manufacturer's page or on the site your buying the wheels from.

**XFire** · 04-15-2011, 08:52 AM

kind of a long shot but if i wanted to have a "perfect fitment" how crazy with the wheels would i go? The rears are already 9in wide. And i am not to sure how much wider i can go. without buying a bunch of wheels how can i get a good idea on fitment, since i haven't seen anyone do a xfire yet. Please and thank you.

**Supleme** · 04-15-2011, 01:35 PM

A easy way to check and see how aggressive you can go with offset is to add spacers until you have the rim where you want it to sit (don't drive on it like this). ie. add 10mm spacer to the rear and you now have a 12mm offset, and so on. Then you can play around with width.

I think a 10-11" rear rim would make the rear look very aggressive and dope. It's going to be trial and error.

**young gunna** · 04-15-2011, 01:43 PM

this may help you a lot
http://www.1010tires.com/wheeloffsetcalculator.asp

**XFire** · 04-15-2011, 06:13 PM

ok so from what i can tell i will need to either settle for 9.5" wide and be considerable cheaper into my wheels or go for a nice set of forged wheels to spec. Opinions? Being kinda on a budget i am leaning towards the 9.5".

On my crossfire what do you think would be the best look? A mesh style wheel or a 5 spoke?

**XFire** · 04-23-2011, 10:59 AM

ok so I have my wheels on the way!

here are the specs
front 20x9 with et22
rear 20x10.5 with et35 will require adapters and all said and done will require fenders to be to house almost 2 inches wider!