so i just recently installed koni yellows w/ GC coils and lowered it all the way it could, I then went for a drive and it started to shake really bad! Everything was good before the install and now im puzzled :/ please if youve experienced this before i would really appreciate your help.... I looked underneath the car and found that my axle has a weird angle to it maybe this could be it and if so how would i resolve this issue? Thank you
Follow Us On
Results 1 to 6 of 6
-
12-12-2012, 02:06 AM #1
- Join Date
- Feb 2011
- Posts
- 50
Civic em1 Slammed and now shakes NEED HELP PLEASE
-
12-12-2012, 02:48 AM #2
- Join Date
- Dec 2012
- Location
- Belgium
- Age
- 23
- Posts
- 18
I think there's something wrong with your axle...
Did you already replace the rubber shielding of the axle ?
-
12-12-2012, 07:45 AM #3
- Join Date
- Feb 2011
- Posts
- 50
No I haven't replaced anything ...
-
12-12-2012, 08:26 AM #4
- Join Date
- Dec 2012
- Location
- Belgium
- Age
- 23
- Posts
- 18
Take off the rubber shielding and take a look if the axle enters the engine.
I think the bering from the axle has some issues...
-
12-12-2012, 09:04 AM #5
- Join Date
- Feb 2011
- Posts
- 50
ok well both sides look like this... so not only one side is giving me a problem....
Originally Posted by D4VY
-
12-26-2012, 06:46 PM #6
- Join Date
- Dec 2012
- Location
- Western, MA
- Age
- 22
- Posts
- 5
Your cv joint might be binding because of the angle......sorry if this is a little late. and if so hows it doing now?
I Have Survived The Flames And Have Walked Through The Ashes.
Reply With Quote
Posting Permissions
All times are GMT -7. The time now is 02:31 AM.
vBulletin Skin By: PurevB.com
Powered by vBulletin® Version 4.2.0
Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.
Bookmarks