Follow Us On Follow us on Facebook Follow us on Instagram Follow us on Tumblr
Register
Results 1 to 8 of 8
  1. #1

    Join Date
    Apr 2012
    Location
    Nassau, Bahamas
    Posts
    6

    E36 M3 stance help!

    Just recently purchased an E36 M3 and have been looking around for the best wheel/tire set up.

    My thoughts have been 17x9 et10 w/ 225 or 215/35 up front and 17x10.5 et0 to -5 w/ 245/35 in the rear. Adjustable camber arms in the rear also. GC adjustable coil overs
    Hopefully by the end of my build i will have around 500hp so in the rear i think i need nothing smaller than a 235.
    I know i will need to roll the fenders but i was hoping i didnt have to pull them. Anyone have any pointers or thoughts.

    All comments are welcome


    Thanks in advance!!
    J

  2. #2
    Quote Originally Posted by Stanceee View Post
    Just recently purchased an E36 M3 and have been looking around for the best wheel/tire set up.

    My thoughts have been 17x9 et10 w/ 225 or 215/35 up front and 17x10.5 et0 to -5 w/ 245/35 in the rear. Adjustable camber arms in the rear also. GC adjustable coil overs
    Hopefully by the end of my build i will have around 500hp so in the rear i think i need nothing smaller than a 235.
    I know i will need to roll the fenders but i was hoping i didnt have to pull them. Anyone have any pointers or thoughts.

    All comments are welcome


    Thanks in advance!!
    J
    Just pull them unless you want to run a bunch of camber using rear camber plates. Pulling is always a smart option otherwise downsize the setup. I didn't want to pull my rears but here I am, doing them saturday lol

  3. #3

    Join Date
    Apr 2012
    Location
    Nassau, Bahamas
    Posts
    6
    Lol yeaaa I know I should just pull them but I don't have a roller.. You also have an E36 or u pulling the fenders on the STI in ur sig??

    How'd it go?? Pics??

  4. #4
    Quote Originally Posted by Stanceee View Post
    Lol yeaaa I know I should just pull them but I don't have a roller.. You also have an E36 or u pulling the fenders on the STI in ur sig??

    How'd it go?? Pics??
    Just my STi. Fronts were rolled. Its really easy just find someone local if you want that has a roller. Hit up a local car forum and you'll find someone if you don't want to do it yourself. Take your time and keep the heat on.

    I'm getting mine rolled/pulled saturday by a guy who has 18x10 wheels on 265/30 on an STi. I trust him since he's a magician with subarus. Its really easy to mess up the rears on my car and break the flare off.

    Every other car is simpler than mine in the rear haha

  5. #5

    Join Date
    Apr 2012
    Location
    Nassau, Bahamas
    Posts
    6
    Wow 265!! that will be beefy

    Yea i think i will have to burrow a roller and give it a shot.

    I live in the Bahamas so im sure there arent too many rollers around lol

  6. #6
    Quote Originally Posted by Stanceee View Post
    Wow 265!! that will be beefy

    Yea i think i will have to burrow a roller and give it a shot.

    I live in the Bahamas so im sure there arent too many rollers around lol
    My bad he had 225/40 on the 10 wides. He has a 9.5 setup with 265/30 lol

  7. #7

    Join Date
    Apr 2012
    Location
    Nassau, Bahamas
    Posts
    6
    even beefier!


    No one with an stanced E36 M3??

  8. #8

    Join Date
    Apr 2012
    Location
    Nassau, Bahamas
    Posts
    6
    ^^^ttt

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •