Everyone, meet Blain. He is a 20 year old car enthusiast out of Ontario, Canada. We have secretly been admiring his car for the last year or so, just like many of you who know Blain. Once we found out that he was upgrading his wheels to something new (CCW Wheels) we had to get it up on StanceNation! There are only a handful of G35 sedans out there that are doing it right, this being one of them. For those who are new to S:N, when we say “doing it right“, we are referring to the fitment and overall appearance of the car. Let’s get into all the sick photos and some specifications, what do you say?
Photos By: Dave Levitt exclusively for StanceNation.com
Those sexy wheels are made by CCW as you can see in the photo. They’re the LM20’s in 18×10 with (+12 offset) and 225/40 tire up front and 18×11 with (+20 offset) and 255/35 tire in the rear. Blain added a set of Project Kics R40 Neo Chrome to finish the wheels off. Behind the wheels are a set of EBC 3GD Slotted and Drilled rotors w/EBC green stuff pads. For the suspension Blain went with Stance GR+ w/10k & 12k springs. Front camber is sitting at about -3.7 while the rears are at -4.7.
While the exterior may look stock, Blain actually did quite a few changes to it. We always get questions about the paint of cars we feature, and the one you are looking at is the OEM Infiniti Emerald mist green. Up front Blain is rocking an Authentic Nismo front bumper, a blacked out grill and Morimoto Custom projectors w/ Apollo shrouds and blacked out headlights. Blain wasn’t feeling the rear end of his ’03 G35, so he went ahead and did a full ’05 rear end conversion (Tails Bumper splash guards and Trunk release). He also added a custom one-off carbon fiber trunk with molded lip spoiler and shaved reverse lights and emblem. Lastly, the spoiler you see on the roof is made by Kakumei and it sets the car off just right! Check out more photos and specifications by clicking the Read More button below.
One of the things that we happen to like about Blain’s ride is that he has spent some time under the hood too. He’s added things like Motordyne 5/16″ plenum spacer, Custom polished FuRookie Intake, Polished throttle body, JDM RHD battery cover and JDM harness cover and polished GT-spec strut bar. On the performance oriented side he has added a Magnaflow straight through mid pipe, Megan Y pipe, “Fat Boy” tips and what he likes to call “Asphalt cat delete”. We’ll let you figure that out yourself.
When we asked Blain what his future plans are, he told us the following: “Custom exhaust including tuck and HFC, Finishing wire tuck and other engine bay prettiness, Little interior love including seats and not to break anything”! We have a feeling that we’ll be seeing a lot more of this car in the near future. Big shout out to Blain and photographer Dave Levitt for making this feature happen! We’ll leave you with a couple more photos below. Make sure you email us at snfeatures@gmail.com if you think your ride has what it takes to be on our site. Big shout out to our Canadian fans!
